Factory Cheap Hot Stainless Steel Wedge Anchors - Anchor Series Of Hot Selling Products – Dashan

Dashan FASTENER CO, LTD IS A LARGE FASTENER PRODUCTION GROUP, which has multiple production workshops. The material can produce ordinary carbon steel products or stainless steel products. The anchor series products include car repair gecko, chemical anchor bolts, expansion bolts, implosion bolts and so on. The company’s products and China Construction Group, China Railway Group, China Metallurgical Group, China Communications Group, China Coal Group have carried out in-depth cooperation.

Anchor bolts are more than wall-to-sill connectors; they serve as your structure’s primary form of resistance against several types of building loads. Playing such a key role, foundation anchor bolts are subject to a broad range of regulations and building codes. While your local building department has the last word on specific requirements, an understanding of the options among installation materials and methods helps you plan your construction project, estimate materials and discuss details with the building department, designers or contractors.

While the most common shape for cast-in-place anchor bolts is an L or J shape, certain projects call for squiggly, S-shaped bolts or U-shaped bolts. Because bent bolts won’t fit into straight holes, epoxy-anchored bolts are typically straight rods that resemble a headless machine bolt. An anchor bolt diameter ranges from 3/8 inch to 1 inch or more and the length runs from roughly 6 inches to greater than 3 feet. While sizing requirements vary according to local code, 1/2 inch diameter, embedded at least 7 inches, is usually the minimum. If your local regulations call for bolts to embed at least 7 inches below the foundation’s top surface, you’ll need an 8- to 12-inch-long bolt to allow for protrusion above the foundation.

Cast-in-place and epoxy-anchoring are the most common methods of connecting anchor bolts to a foundation. Cast-in-place refers to plunging the bolts into the foundation’s wet mortar or concrete, or pouring around braced bolts, and allowing the masonry to cure around the bolt. Epoxy-anchoring is a retrofit installation method. After masonry cures, builders drill an anchor bolt hole in the wall or slab and use epoxy to adhere the bolt to the foundation. While many municipalities allow either installation method, some areas accept only one or the other. Building authorities occasionally allow mechanical anchors, such as masonry expansion anchors, for remodeling and retrofit applications.

Bolt spacing requirements range from every 4 feet to every 8 feet, depending on your project’s design and circumstances. In many cases, increasing the bolt’s diameter allows you to increase the minimum spacing requirement. For example, your building code might require 1/2-inch bolts spaced every 4 feet, but might allow 5/8-inch bolts set every 6 feet. Codes also specify the minimum distance between the wall’s ends and the outermost bolts, usually at least 12 inches.

Q1: Can you buy a samples placing orders?
A1: Yes,we welcome sample order to test and check quality.Mixed samples are acceptable.

Q2: What’s your leading time?
A2:It depends on the order quantity and the season you place the order.-Usually we can ship within 7-15 days for small quantity,and about 30 days for large quantity.

Q3: What is your payment term?
A3:T/T,Western Union,MoneyGram,and Paypal .This is negotiable.

Q4: What is the shipping method ?
A4:It could be shippied by sea,by air or by express, You can confirm with us before order.

Q5: How do you make your business long-term and good relationship?
A5:We keep good quality, competitive price and Excellent after-sales service to ensure our customers benefit .